Windows Nt 4.0; Removing 3Com Dynamicaccess Advanced Server Features; Windows 2000 - 3Com 3C990B-TX-M User Manual

Removing 3Com DynamicAccess Advanced Server Features

Removing 3Com DynamicAccess Advanced Server Features
6 Click OK to confirm the device removal.
NOTE: Note that removing the network driver does not result in the removal of
the diagnostics software. See "Removing the 3Com NIC Diagnostics Program"
on page 95.
You are prompted to restart the computer.
If you are physically removing the NIC from the computer, click No. Do not restart the
computer until you shut down the system, turn the power off, and remove the NIC from
the computer.
If you are reinstalling the NIC software, click Yes to restart the computer.
Follow the steps in this section to remove 3Com DynamicAccess Advanced Server features
for your operating system.

Windows NT 4.0

To remove 3Com DynamicAccess Advanced Server features:
1 From the Start menu, select Settings/Control Panel.
2 Double-click the Network icon.
3 In the Network window, click the Protocols tab.
4 In the Protocols tab, select DA Pass Thru Driver Transport.
5 Click Remove.
6 Follow the prompts to remove the software and reboot the server.

Windows 2000

The Windows 2000 system does not allow you to uninstall the 3Com Advanced Server
technology miniport using the Device Manager. To remove 3Com DynamicAccess
Advanced Server features:
1 Launch the Windows 2000 Network and Dial-up Connections window.
2 Select a Local Area Connection icon.
3 Click the right mouse button and select Properties from the menu. The Local Area
Connections Properties window appears.
4 Click the General tab.
5 In the General window, select DynamicAccess Protocol and click Uninstall.
89