Displaying Network Statistics; Removing The 3Com Nic Diagnostics Program - 3Com 3C990B-TX-M User Manual

10/100 pci network interface card with 3xp processor

Table of Contents

Displaying Network Statistics

When you drag the mouse pointer over the icon (but do not double-click the icon) a

network statistics box appears, displaying the following information:

Frames Sent and Received—A count of the number of frames (packets) sent and

received through the NIC since the last time statistics were reset.

Link Speed—The speed (10 Mbps or 100 Mbps) at which the NIC is connected to the network.

The information is updated each time you move your mouse pointer over the 3Com icon.

The 3Com NIC Diagnostics Program can be removed using the Add/Remove Programs

Wizard in Windows, or by using the EtherCD.

For instructions on using the Add/Remove Programs Wizard in Windows, refer to your

Windows documentation.

To remove the 3Com NIC Diagnostics program using the EtherCD:

1 Start Windows.

2 Insert the EtherCD in the CD-ROM drive.

The EtherCD Welcome screen appears.

3 Click NIC Software.

4 Click NIC Drivers and Diagnostics.

5 Click Installation Utilities.

6 Click Remove Diagnostics.

7 Click Proceed, and then follow the prompts on the screen.

Removing the 3Com NIC Diagnostics Program

Table of Contents

Do you have a question about the 3C990B-TX-M and is the answer not in the manual?

3c990bsvr