6
en | Introduction
D8103 Enclosure
D8109 Fire Enclosure
1.3
Certifications and Approvals
The ITS-DX4020-G is designed to comply with the following certifications and approvals:
Agency
FCC
NIST
PTCRB
CSFM
UL
1.4
Control Panel Compatibility
–
–
–
1
GV2 Series consists of the D9412GV2, D7412GV2, and D7212GV2 control panels. Refer to
your control panel's documentation for programming instructions. When programming the
ITS-DX4020-G, follow your control panel's DX4020 network programming instructions.
2
GV3 Series consists of the D9412GV3, D7412GV3, and D7212GV3 control panels. Refer to
your control panel's documentation for programming instructions. When programming the
ITS-DX4020-G, follow your control panel's DX4020 network programming instructions.
NOTICE!
When using a GV2 or GV3 Series control panel in GPRS mode, the ICP-SDI-9114 SDI Splitter is
required. Refer to the ICP-SDI-9114 Installation Instructions (P/N: F01U030068).
F01U163066 | 01 | 2010.05
Grey steel enclosure measuring 41 cm x 41 cm x 9 cm (16 in. x 16 in. x 3.5 in.).
Red steel enclosure measuring 40.6 cm x 40.6 cm x 8.9 cm
(16 in. x 16 in. x 3.5 in). UL Listed. Includes a lock and key set.
Certification
FCC, Part 15 Radiated/Conducted Emissions
FIPS 197 Certificate No. 1247
Approved
Approved
–
UL 365, Police Station Burglar Alarm Units and Systems
–
UL 864, Commercial Fire Alarm Signaling
–
UL 985, Household Fire Warning System Units
–
UL 1023 Household Burglar-alarm System Units
–
UL 1610, Central Station Burglary
FPD-7024 Fire Alarm Control Panel
GV2 Series (firmware version 7.07 or 7.08)
2
GV3 Series
Installation and Operation Guide
GPRS/GSM IP Communicator
1
Bosch Security Systems, Inc.