Bosch Conettix ITS-DX4020-G Installation And Operation Manual page 38

38 en | Firmware Upgrade
Figure 6.4 USB Login Window
6.
7.
8.
9.
10. Select File? Transfer>Xmodem>Send.
Figure 6.5 Tera Term File Menu Path
11. In the XMODEM Send dialog box, use the Look in: menu to navigate to and select the
F01U163066 | 01 | 2010.05
Enter the password to log on. The default password is 4020G (all uppercase).
The user interface allows three attempts to enter the password correctly. After three
failed attempts, you must reset the ITS-DX4020-G by removing the jumper plug from the
CONFIG MODE jumpers.
Press the [Enter] key to continue. The USB main menu opens.
Select option 7 Upgrade Firmware.
Press the [Enter] key. Tera Term asks you to start the Xmodem transfer of the upgrade
image file.
location to which you downloaded the ITS-DX4020-G binary file. Refer to Figure 6.6,
Page 39.
Installation and Operation Guide
GPRS/GSM IP Communicator
Bosch Security Systems, Inc.