Install The Usb Driver - Bosch Conettix ITS-DX4020-G Installation And Operation Manual

GPRS/GSM IP Communicator
4.
5.
6.
7.
8.
9.
10. Click Save to save the file to the target PC or laptop.
4.2.1

Install the USB Driver

NOTICE!
If the target PC or laptop has only one USB port, you need to install the USB driver only once.
If the target PC or laptop has multiple USB ports, you must install the USB driver each time
the ITS-DX4020-G is connected to a new USB port.
1.
2.
3.
Figure 4.1 Found New Hardware Wizard Main Page
4.
5.
Bosch Security Systems, Inc.
Under the Intrusion Alarm Systems Products heading, scroll to the Conettix -
Information Transport Solutions section. Click the Show product section link.
Click the Conettix IP link.
Scroll to the ITS-DX4020-G GPRS/GSM IP Communicator section. Click the section title
to open the product page.
Under the product image, click the Software tab.
Click OK to accept the license agreement.
To the right of ITS-DX4020-G inf, click on the language link (for example, en).
The File Download dialog box opens.
Ensure that the CONFIG MODE jumper pins are shorted together with the supplied
jumper plug.
Refer to Figure 2.2, Page 8.
Supply power to the ITS-DX4020-G (12 VDC).
Connect the ITS-DX4020-G to the target PC or laptop, using a USB-to-mini-USB (5-pin
mini-B connector) cable (not supplied).
The Found New Hardware Wizard opens.
Select Install from a list or specific location (Advanced), and click Next.
On the resulting Please choose your search and installation options page, select the
Search for the best driver in these locations option button.
Installation and Operation Guide
Configuration | en 21
F01U163066 | 01 | 2010.05