Table of Contents
Advertisement
BATCHFLUX 3100 C
2.7.11 Mounting position
The flowmeter can be installed in every position.
Figure 2-16: Installation in bending pipes
> 25°
1 Drain valve (to empty pipeline)
CAUTION!
Install in a slightly descending pipe section (of 25 degrees or larger), to prevent air from
collecting and to avoid faulty measurements (meter can drain).
CAUTION!
To ensure a correct measurement, avoid draining or partial filling of the flow sensor during
operation.
INFORMATION!
Vertical down position only in conjunction with a control valve.
09/2020 - 4008472601 - QS BATCHFLUX 3100 - R01 en
www.krohne.com
INSTALLATION
2
13
Advertisement
Table of Contents
