Ethernet Configuration; Ethernet Setup; Serial Number And Registration; Other External Communications Generac Beacon - Generac Power Systems PWRcell XVT076A03 Owner's Manual

Ethernet Configuration

Ethernet Setup

For the inverter to communicate with the Generac server
an Ethernet cable with a valid Internet connection must
be plugged into the inverter Ethernet port.
•
A blue Internet LED indicates the inverter has a
successful connection to the PWRview server.
•
If Internet LED is not illuminated, see the Generac
PWRcell Inverter
troubleshooting and connection instructions.
NOTE: It is the installer's responsibility to make sure the
Internet connection is reliable and secure. Generac
recommends always using a hardwired connection.
Generac does not recommend or support using any
wireless or power line carrier network devices. Use these
devices at your own discretion.

Serial Number and Registration

NOTE: Registering an inverter automatically registers all
REbus system components connected to that inverter.
Every REbus-enabled device can be monitored from the
PWRview™ online monitoring system and mobile app.
To register a system for PWRview monitoring:
1. See Figure 3-13.
registration code on the registration decal on the
front of the inverter. This information will be
required for registration.
https://pwrfleet.generac.com
2. Navigate to
using a mobile device scan the registration label
QR code.
3. Follow the on-screen prompts to complete the
profile.
Owner's Manual for Generac PWRCell Inverter
Installation Manual
Locate the serial number and
.
for
Figure 3-13. Serial Number and Registration
Other External Communications
Generac Beacon
Generac Beacon allows the PWRcell system to manage
energy production and storage over the course of the
day. This is called Time of Use (TOU) energy
management. To take advantage of this functionality, the
PWRcell system must include a PWRcell battery and a
reliable connection to the Internet via an Ethernet
connection to a router.
or if
See the Generac PWRcell Inverter Installation Manual for
more information on configuring Generac Beacon.
PEEL AWAY
REGISTER YOUR SYSTEM
SERIAL NUMBER:
XXXXX-XXXXX
REGISTRATION CODE:
RRRR-RRRR
Go to to register
https://pwrfleet.generac.com/
or scan the code above.
Operation
009984
009656
17