Charge/Error Lamp Lights Or Flashes Orange - Canon BJC-55 Series User Manual

Color bubble jet printer
Hide thumbs Also See for BJC-55 Series:
Table of Contents

Advertisement

Windows

CHARGE/ERROR lamp lights or flashes orange

The orange CHARGE/ERROR lamp lights or flashes, the printer
beeps, and printer does not operate.
The printer will beep when an error occurs and the orange
CHARGE/ERROR lamp will light or flash to let you know when and
what type of error has occurred. You may need to switch the printer off
and switch it on again in order to identify the problem.
Refer to the table below to determine the cause of the error.
CHARGE/
ERROR
Lamp
Lights and
remains on
Flashing
136
Chapter 6 Troubleshooting
Macintosh
Other
Beeps
Meaning
1
Paper not set in the
Feed Slot
2
Paper jam
3
BJ Cartridge not
installed
4
Correct and suitable
BJ Cartridge not
installed
6
Battery is not installed
correctly
1 long,
Battery is nearly dead
1 short
1
Paper not set in the
Feed Slot correctly
2
The ink is low*
3
Forcefully
discontinued the BJ
Cartridge
replacement
4
Battery is low
5
Waste ink cartridge is
full
Solution
( 48)
Remove the paper jam. ( 118)
Install BJ Cartridge correctly.
( 39)
Replace with a correct suitable
BJ Cartridge.
( 28)
Charge battery as soon as
possible. ( 60)
Remove the paper from the
Feed Slot and set
correctly.( 48)
When the Low-ink warning is
on, this alert appears. Press
RESUME to continue. Replace
the ink cartridge as soon as
possible. Also, at the same
time reset the low-ink waning
counter. ( 64)
When BJ Cartridge
replacement is forcefully
discontinued, pressing the
RESUME button resume
printing.
Change the battery or charge
the battery ( 60).
The printer may resume and
be able to print by pressing the
RESUME button but this
should not be repeated too
many times. Call for service.

Advertisement

Table of Contents
loading

Table of Contents