The Power Lamp Flashes Orange And Green Alternately - Canon BJC-3000 User Manual

Troubleshooting
Flashes:
7
Cause:
BJ Cartridge defective.
Solution:
Remove each BJ Cartridge and check that the contacts on the BJ Cartridge and cartridge holder are clean.
Also check that the orange protective tape has been removed from the print head, then install the BJ
Cartridge again.
Flashes:
8
Cause:
Waste ink tank nearly full.
Solution:
Press the RESUME button to skip the error so you can continue printing.
When the waste ink tank becomes full, the POWER lamp flashes orange and green six times alternately, and
printing is no longer possible. Contact a Canon service facility to have the waste ink tank replaced immedi-
ately.
The waste ink tank holds the ink used for print head cleaning.
The POWER lamp flashes orenge and green alternately.
Cause:
There may be a service error.
Solution:
Turn off the power once. Then, turn the power on again. If this does not clear the problem, contact your
Canon service facility. Count the number of flashes. (You may be asked for this information.)
69