Setting The Low-Ink Warning; How To Enable The Low-Ink Warning - Canon BJC-55 Series User Manual

Setting the low-ink warning

How to enable the low-ink warning

This printer is provided with a low-ink warning.
Before the printer is shipped, the low-ink warning is set to off. For
details about setting the low-ink warning with the printer driver, see the
Windows Printer Driver Guide or Macintosh Printer Driver Guide.
• The procedure below describes how to switch the low-ink warning on
and off with the operation panel. The low-ink warning can also be
switched on and off with the printer driver. For details, see the
Windows Printer Driver Guide or Macintosh Printer Driver Guide .
• In the printer driver dialogue box, "Ink Cartridge" is displayed for "Ink
Tank".
1.
Press the POWER button to switch the printer off.
2.
Press and hold down the POWER button until you hear 8 beeps and
then release it. This switches the low-ink warning on.
If you released the POWER button at the wrong time, just repeat the
procedure from Step 1.
When an low-ink warning is displayed
1.
When ink runs low in an ink tank, the printer beeps twice and the
CHARGE/ERROR lamp flashes.
2.
Press the CARTRIDGE button on the printer.
Observe the flashing CHARGE/ERROR lamp to determine which
ink tank has run out of ink and requires replacement.
Flash Count
Steady flashing
2 flash intervals
3 flash intervals
3.
Replace the ink cartridge.
64 Chapter 5 Daily Operation and Printer Maintenance
Meaning
Black ink tank low
Colour ink tank low
Black and colour ink tanks low.