Troubleshooting Table; Problems With Operation - Hanseatic HG6085C14T7635EI User Manual

Troubleshooting table

Malfunctions can occur in all electrical appliances. This does not necessarily mean
there is a defect in the appliance. For this reason, please check the tables to see if you
can correct the malfunction.
WARNING!
Risk of electric shock!
Conducting improper repairs to the dis-
hwasher puts the person carrying out
the repairs and the user in danger.
■ Only authorised specialists may re-
pair the dishwasher. If in doubt, con-
tact our service team for this (see
page EN-38).
■ Only carry out the actions which are
described in this user manual.
■ Never repair defective dishwashers
– or dishwashers which you presume
to be defective – yourself. You can en-
danger yourself and subsequent users.

Problems with operation

Problem
The dishwasher cannot
be switched on.
The selected dishwas-
hing programme will not
start or it stops.
Risk of damage!
Improper handling of the dishwasher
can lead to property damage and to
damage to the dishwasher.
■ If water overfl ows, close the water
■ If the water has overfl owed, remove
Possible cause
The mains plug has not been
inserted into a socket.
There is no voltage being
supplied through the socket.
The appliance door is not
closed properly.
The water tap is not properly
on.
The inlet hose is defective.
There is a risk of overflowing.
The electrical water stop sys-
tem has been activated.
Troubleshooting table
NOTICE
supply immediately and do this be-
fore contacting the service team (see
page EN-38).
any water standing in the dishwasher
before restarting a dishwashing pro-
gramme.
Solution
Insert the mains plug into the so-
cket.
Check the fuse. Check the socket
by connecting another device.
Close the dishwasher door.
Turn the water tap on completely.
Contact our service team (see
page EN-38).
Page EN-35