Starting The Dishwashing Pro; Unloading The Dishwasher - Hanseatic HG6085C14T7635EI User Manual

Page EN-24 Dishwasher operation
Starting the dishwashing
programme
(6)
4. Start the programme with the
ton (11). If you have
– not set up a start delay, the programme
cycle will begin after a few seconds.
– set up a delayed start, the display will initi-
ally still show the start-delay duration (6);
H
the dots between
hours will flash. After the start delay runs
out, the programme will start.
During the programme the display will show
the time remaining (6); the dots between
hour and minute numbers will flash.
At the end of the programme cycle, an
acoustic signal will sound 8 times and the
end
display will show .
5. Switch the dishwasher off using the
ton (18).
6. Turn the tap off.
7. Wait a little while before unloading the dis-
hwasher.
(11)
but-
and the number of
but-

Unloading the dishwasher

CAUTION!
Risk of scalding!
If you open the appliance door, hot
steam will come out.
■ Maintain a suffi cient distance from
the appliance door and do not hold
your head or upper body directly abo-
ve the open appliance door.
■ Make sure that children do not open
the appliance door if the programme
has only fi nished a short time ago.
■ Only open the appliance door slight-
ly to allow the steam to escape more
easily.
■ Allow the dishes to cool before unloa-
ding the dishwasher.
Risk of injury!
An open appliance door can quickly be-
come a tripping hazard.
■ Close the appliance door after every
use.
■ Only leave the appliance door slightly
open to cool down.
NOTICE
Risk of damage!
■ Make sure that children and pets
do not stand on the open appliance
door.
Once the programme has come to an end
and the dishes have cooled, you can remove
them.