Clearing The Counter; Procedure For Clearing The Counter Of The Fixing Assembly - Canon imagePRESS C800 Series Operator's Maintenance Manual

1
Initial Setup > Basic Operation > Clearing the Counter > Procedure for Clearing the Counter of the Fixing Assembly
■ Detailed Information Screen
On the Counter Operation screen, select an ID, and press the [Details]. The screen showing
the details of the selected Fixing Assembly will appear.
NOTE:
This information shows the state of the Fixing Assembly registered by the service
technician.
1 Initial Setup > Basic Operation > Clearing the Counter > Procedure for Clearing the Counter of the Fixing Assembly

Clearing the Counter

The counter of the part which has been replaced/cleaned needs to be cleared after replacing/
cleaning the part.

■ Procedure for Clearing the Counter of the Fixing Assembly

1) Check the ID label for operator maintenance affixed to the Fixing Assembly, and write down
the ID.
F-1-17
1-12
000001
F-1-18
1-12