Replaceable Parts List Screen In Operator Maintenance Mode; Display; Control Keys - Canon imagePRESS C800 Series Operator's Maintenance Manual

1
Initial Setup > Basic Operation > Replaceable Parts List Screen in Operator Maintenance Mode > Control Keys
Replaceable Parts List Screen in Operator Maintenance
Mode
Press [Replaceable Parts] on operator maintenance basic screen to show the replaceable
parts list.
The replaceable parts are listed here together with each counter reading.
CAUTION:
This is the screen when logging in the Operator Maintenance mode, so any changes
made during login are not reflected here.
1 Initial Setup > Basic Operation > Replaceable Parts List Screen in Operator Maintenance Mode > Control Keys

■ Display

Item No.
Replacement Icon
Maintenance
Wear Status
Count
Recommended Value

■ Control Keys

Names of Key
Details
Counter Operation
Print List
F-1-12
CAUTION:
If [To Rplcmt./Cleaning] is pressed immediately after pressing [Print List], wait time of
approx. 2 minutes is required in order to protect the device.
Items
8 digit characters and/or numbers (format XXX-XXXX)
Max. 34 single byte characters (overflow will be rounded)
0 to 999 %
8 digit numbers
8 digit numbers
Function
Select a parts to enable [Details] key.
Press this key to show the detailed information screen.
"Detailed Information Screen"(page 1-10).
Select a parts to enable [Counter Operation] key.
Press this key to clear the counter.
"Clearing the Counter"(page 1-12).
Press [Print List] to print the replacement parts list.
This key is disabled (shaded) when A4 or larger size paper is not loaded or
it is in Replacement/Cleaning mode.
1-8
Contents
T-1-7
T-1-8
1-8