Replaceable Parts; Cleanable Parts - Canon imagePRESS C800 Series Operator's Maintenance Manual

2
Procedure of Replacement/Cleaning > List of Operator Replaceable/Cleanable Parts > Cleanable Parts
List of Operator Replaceable/Cleanable Parts
The parts that need to be replaced/cleaned after a certain period of use, their estimated life (number of sheets) and the cleaning interval (number of seconds) are shown in the following table. Be sure
to replace or clean the part in order to maintain the performance and functions of the host machine.
NOTE:
• The expected life is based on the median of the evaluation data. The actual life may be differed depending on the installation environment and/or the machine use. Please note that parts numbers are
subject to change due to improvement or others.
• The number written in "Adjustment after replacement" indicates the adjustment order.

Replaceable Parts

Category Part name
Transfer
Secondary Transfer Outer Roller
area
Fixing Assembly / Fixing Belt Unit
Fixing Assembly / Pressure Belt Unit
Fixing Assembly / Pressure Sub
Fixing area
Thermistor (Rear)
Fixing Assembly / Pressure Sub
Thermistor (Front)

Cleanable Parts

Cleaning interval (seconds)
Part image
Category Part name
No. PRESS
C800
Fixing Refresh
Cleaning - 3,600
Roller
2 Procedure of Replacement/Cleaning > List of Operator Replaceable/Cleanable Parts > Cleanable Parts
Replacement interval (sheets)
image image
Part No.
PRESS PRESS
C800 C700
FC0-9786 900,000 750,000
FM1-C721 600,000 500,000
FM1-C722 600,000 500,000
FK2-7870 1,200,000 1,000,000
FK2-7871 1,200,000 1,000,000
image image image
Q'ty
PRESS PRESS PRESS Auto Adjust
C700 C600 C60 Gradation
3,600 3,600 3,600 1 1
Adjustment after replacement
image image
Q'ty
PRESS PRESS Auto Adjust
C600 C60 Gradation
600,000 600,000 1 1
400,000 400,000 1
400,000 400,000 1
1
600,000 600,000 1
600,000 600,000 1
Adjustment after replacement
Auto Parts replaced
Correct Correct Output Test by operator
Shading Color Tone Page
Settings
Fixing Refresh
2 3 4
Roller
Parts replaced
Auto Correct
Correct Output Test by operator
Color Tone
Shading Page
Settings
Secondary
2 3 4
Transfer Unit
Fixing
2 3 4
Assembly
Remarks
The counter value in service mode indicates
the time (the number of seconds) during
which the Refresh Roller is engaged.
Equivalent to 600,000 under normal
conditions
2-2
As of November 2014
Reference
p. 2-3
p. 2-7
T-2-1
As of November 2014
Reference
p. 2-13
T-2-2
2-2