1
Initial Setup > Basic Operation > Login to Operator Maintenance Mode > Moving to Operator Maintenance Mode
Login to Operator Maintenance Mode
■ Moving to Operator Maintenance Mode
To use the functions provided in Operator Maintenance mode, enter the password to move to
Operator Maintenance mode.
1) Press [Settings/Registration] > [Adjustment/Maintenance] > [Operator Maintenance].
NOTE:
When the [Operator Maintenance] is not displayed, contact the service representative.
2) Press [Operator Maintenance Mode].
1
Initial Setup > Basic Operation > Login to Operator Maintenance Mode > Moving to Operator Maintenance Mode
-> Password input screen is shown.
3) Enter the password and press [OK].
-> When the entered password is successfully authenticated, operator maintenance
basic screen is shown.
F-1-2
-> When the password authentication fails, press [Cancel] to return to Operator
Maintenance (Adjustment/Maintenance) screen.
NOTE:
Password can be changed with the following setting.
"Changing Password"(page 1-38).
F-1-3
1-3
F-1-4
F-1-5
1-3