Display Of Log Of Alarm-2 - Canon imagePRESS C800 Series Operator's Maintenance Manual

1
Initial Setup > Adjustments/Settings > Display Log Menu Screen > Display of Log of ALARM-2

■ Display of Log of ALARM-2

The log of alarm (ALARM-2) is displayed.
NOTE:
This function cannot be used in the normal setting. If it needs to be available, contact a
servicing person.
This function cannot be used in the Replacement/Cleaning mode.
1) Press [ALARM-2] on the log display menu screen.
-> The ALARM-2 screen is displayed.
1 Initial Setup > Adjustments/Settings > Display Log Menu Screen > Display of Log of ALARM-2
2) Confirm the log of alarm (ALARM-2).
3) After confirming the log, press [OK].
● The contents of the display
Items
No.
DATE
TIME1
TIME2
CODE
DTL
CNTR
F-1-83
F-1-84
Contents
Sequence of alarm activation (the larger the number is, the older time alarm occurred
in) Maximum 50 cases
Date of alarm activation (2 digits both for month and date)
Time of alarm activation (24-hr display)
Time of alarm recovery (24-hr display)
Code of alarm activation location
Detailed alarm code
Soft counter at the time of alarm activation
1-43
T-1-20
1-43