1
Initial Setup > Adjustments/Settings > Adjustment/Maintenance Menu screen > Automatic Gradation Adjustment
● Initializing Standard Values for Calibration
If you perform automatic gradation adjustment but cannot adjust gradation, density, or color
correctly, or scanned error message appears for the test page, set [Initialize When Using Full
Adjust] to 'On', and then perform [Full Adjust].
1) In Adjustment/Maintenance menu screen, press [Auto Adjust Gradation].
-> Automatic adjustment gradation screen is displayed.
1
Initial Setup > Adjustments/Settings > Adjustment/Maintenance Menu screen > Automatic Gradation Adjustment
2) Press [Initialize When Using Full Adjust] -> [On] -> [OK].
F-1-51
3) Perform Full Adjust by following steps 2 to 10 in "Full Adjustment".
1-27
F-1-52
1-27