PaloAlto Networks PA-5200 Seriesp Hardware Reference Manual page 22

Install the PA-5200 Series Firewall in an Equipment Rack
screws (#10-32 x 3/4" or #12-24 x 1/2") for your rack and torque to 25 in-lbs. Use cage nuts
(not provided) to secure the screws if the rack has square holes.
STEP 4 | Slide one back rack-mount bracket onto each of the two previously installed side rack-
mount rails and secure the brackets to the back rack posts using four screws for each bracket
(#10-32 x 3/4" or #12-24 x 1/2") and torque to 25 in-lbs. Use cage nuts (not provided) to
secure the screws if the rack has square holes.
PA-5200 Series Next-Gen Firewall Hardware Reference
22
2021 Palo Alto Networks, Inc.
©