Advertisement
Dab
caulk in siding
channel on both
sides of window.
69.
Locate Window Insert. Before installing, dab caulk in siding channel on both sides of window
opening. This will prevent water from getting in behind window. Position window in cavity and secure
with 8 - 1 1/4" Screws. Caulk gap between siding and window at top. This requires a large amount
of caulking but is important to fill. Later, Window Trims will be installed to hide caulking.
70.
Position Window Trim around window doing a dry run first and attach with 4 - 1 1/2" Finishing
Nails per piece. Window trim has a small dado on reverse face. Outside flange of window will roughly
sit in the dado to give a better fit.
71.
Attach Door Handles and Black Hasp as shown above. Handles and Hasp mounted with
3/4" Black Screws.
Toll Free 1-888-658-1658
Trim dado
sits in flange.
Pre-drill 1/4"
deep with 1/8" drill
bit for all door
hardware.
www.outdoorlivingtoday.com
Page 35
caulk in siding
Requires a large
sales@outdoorlivingtoday.com
Run
gap at top.
amount.
Advertisement
