Advertisement
43.
Overhang the Metal Roof Panels past the Battens on the sides by approximately 3/4". The
overhang on the front and rear will be set by the Metal Roof Hangers but should be approximately 1"
at the rear and 4" at the front.
44.
Adjust the position of remaining Metal Roof Panels on Battens as per Step 43. Overlap Metal
Roof Panels to achieve desired overall width. Overall width past the end of Battens can vary from 3/4"
to 3" depending on your personal preference.
Toll Free 1-888-658-1658
3/4" Overhang
www.outdoorlivingtoday.com
Page 23
Metal Roof Panels
should overlap
each other.
sales@outdoorlivingtoday.com
Advertisement
