Advertisement
Door Stop
58.
Locate Sliding Door and flip over onto a clean, dry and level spot. Position Door Stop
(1 1/2" x 2 1/2" x 66 1/4") on left inside frame of door as shown above. Position 1" from outside
trim of door as shown above. Attach with 3 - 2 1/2" Screws into horizontal door framing.
59.
Locate Roller Assemblies. Before attaching to top of doors, assemble the units as shown
above. Attach two Roller Assemblies onto door with 4 - 1 1/4" Screws per Assembly, center on the
door framing 12 1/2" from each end as shown above.
Toll Free 1-888-658-1658
www.outdoorlivingtoday.com
Page 30
Twist Roller Cart onto bolt.
After door is hung, you may need to
adjust this until door hangs straight
up and down at desired height.
sales@outdoorlivingtoday.com
Advertisement
