Advertisement
Pilot Hole
first.
13.
With the corner wall attachment complete, position the second rear wall panel in place so
bottom 2x3 wall framing is sitting flush with outside floor framing. Wall siding should overhang floor by
approximately 3/4". When positioned correctly, attach both wall panel studs together as per
Step 12 with 3 - 2 1/2" Screws.
Pilot Hole
first.
15.
Secure side wall panel to rear wall panel as per Step 12. Next, locate the Front Wall Panel
(73" high) and position in front right corner.
Toll Free 1-888-658-1658
www.outdoorlivingtoday.com
sales@outdoorlivingtoday.com
Page 11
Advertisement
