Advertisement
16.
Once again position the 2x3 wall plate so it
sits flush on floor and siding overhangs.
Note: Front Wall Panel is only 73" high.
18.
Locate Front Left Corner Filler Trims (2 @ 1/2" x 2 1/2" x 36") and Door Jamb
(1 1/2" x 3 1/2" x 73"). Attach both Fillers with 4 - 1 1/2" Finishing Nails as shown above. Place
Door Jamb against inside wall stud and align with edge of filler. Attach Jamb with 4 - 2 1/2" Screws.
19.
Locate both Door Headers - Long and Short (step facing up and out). Attach long header using
5 - 2 1/2" Screws. Pre-drill right side and angle screw down. Line up header/filler/wall stud as shown
above. Position and attach short header using 2 - 2 1/2" Screws as shown above.
Toll Free 1-888-658-1658
17.
Front Wall Stud to Side Wall Stud with
3 - 2 1/2" Screws.
www.outdoorlivingtoday.com
Page 12
Pilot Hole
first.
When correctly positioned, secure
Door
Jamb.
3/4" thick
Filler.
sales@outdoorlivingtoday.com
Advertisement
