Advertisement
66.
Place Foam Enclosures on rear of Metal Roof Panels. Space evenly from side-to-side before
attaching Metal Ridge Cap in Step 67.
67.
Place Metal Ridge Caps on top of Metal Roof at the rear of your shed. Evenly space from side-
to-side, allowing the ridge caps to overlap each other. Overhang each cap approximately 1" on each
end. When ridge caps are correctly positioned, secure with 4 - 2" Metal Screws, using 1/4" Nut Driver
as per Step 48. Screw into top most Batten. Metal screws are self-tapping, do not overtighten!
68.
Attach Facia / Detail Plates to cover seams where Front and Rear Facia pieces come
together. Secure with 4 - 1 1/2" Finishing Nails per piece.
Toll Free 1-888-658-1658
www.outdoorlivingtoday.com
Page 34
sales@outdoorlivingtoday.com
Advertisement
