Advertisement
41.
Center Facia Nailing Strips (3/4" x 3/4" x 51") underneath outside of each Batten. Attach with
3 - 1 1/4" screws evenly spaced into the Batten. The Facia Nailing Strips provide a greater nailing
surface later when attaching Side Facia.
Metal Roof Hangers will
temporarily help keep Metal
Roof Panels in place before
they are fastened.
42.
Locate Metal Roof Hangers (3pcs) and Metal Roof Panels (3pcs - 39" wide x 58 1/2" long). To
temporarily help hold Metal Roof Panels in place, hook a Metal Roof hanger onto the lower Batten
approximately where the center of the first Panel will be. Place the first Metal Roof Panel on Battens.
Do not fasten Panels down until Steps 46 & 48. Place other two Metal Roof Panels on roof in the same
way.
Toll Free 1-888-658-1658
www.outdoorlivingtoday.com
Page 22
sales@outdoorlivingtoday.com
Advertisement
