Advertisement
Remove Metal
Roof Hangers.
47.
Before fully fastening Metal Roof Panels down, remove the Metal Roof Hangers and insert
Foam Enclosures between Metal Roof Panels and Battens at the front. Enclosures will prevent mois-
ture and unwanted bugs, etc from entering your shed through here.
Secure lower/front
Batten row, be careful
not to overtighten
48.
Using 4 - 2" Metal Roof Screws and 1/4" Nut Driver, secure Metal Roof Panels down to
lower/front Battens. Tighten screws in Middle Batten row that were partially secured in Step 46. Metal
screws are self-tapping, do not overtighten!
Note: If Top Siding Pc. for
Angle
Wall
was
installed in Step 22 it can
be done now. Attach with
3 - 1 1/2" Finishing Nails
per piece.
Toll Free 1-888-658-1658
Center of Battens
not
www.outdoorlivingtoday.com
Tighten middle row,
careful not to overtighten.
Page 25
sales@outdoorlivingtoday.com
Advertisement
