Download Print this page

Trim; Corner Trim; Side Rear Corner Trim; Rear Corner Trim - OLT SS84-SLIDER-METAL-AK Assembly Manual

8x4 spacesaver sliding door - metal roof - ak

Advertisement

Rear Corner
Trim 5 1/2" wide.
53.
To Trim out rear corners, locate a Side Rear Corner Trim (1/2" x 2 1/2" x 88 3/4") and a
Rear Corner Trim (1/2" x 5 1/2" x 88 3/4").
54.
Place both trims in rear corner and align as illustrated above. Do a dry run prior to attaching to
achieve best fit.
Start with 5 1/2" wide Rear Corner Trim and align tight underneath soffit to
determine vertical height. Attach with 8 - 1 1/2" Finishing Nails per piece. Position and attach Side
Rear Corner Trim (2 1/2" wide) using 8 - 1 1/2" Finishing Nails, aligning at bottom with wide trim.
Complete other front corner the same.
55.
To completely trim out front corners, locate Side Front Corner Trims (1/2" x 2 1/2" x 80") and
Front Corner Trims (1/2" x 5 1/2" x 79"). Align and attach as per Step 53.
Toll Free 1-888-658-1658

Side Rear

Corner Trim

2 1/2" wide.
See Step 61 to confirm Lower Door
Track and Track Stops fit between
Wide Front Corner Trim
tight underneath
soffit.
www.outdoorlivingtoday.com
Page 28
tight
underneath
soffit.
sales@outdoorlivingtoday.com

Advertisement

loading