Advertisement
26.
Position and secure 2nd Wall Extender Panel as per Steps 24 & 25. Additionally, attach to first
Extender with 2 - 2 1/2" Screws.
27.
Align Horizontal Wall Cleats (1 @ 3/4" x 3 1/2" x 70", 1 @ 3/4" x 3 1/2" x 21") flush with top of
Rear Wall framing. To help strengthen the Rear Walls, there is a short and a long wall cleat which meet
off-center from the seam between walls. Attach Cleats with 8 - 1 1/4" Screws.
28.
Align Interior Door Header (1 @ 1 1/2" x 2 1/2" x 44") flush with top of framing on front wall and
underneath door header. Attach with 3 - 2 1/2" screws.
Toll Free 1-888-658-1658
Advice: Use Interior Door Header to confirm
door opening is 44" wide.
www.outdoorlivingtoday.com
Page 15
sales@outdoorlivingtoday.com
Advertisement
