Download Print this page

OLT SS84-SLIDER-METAL-AK Assembly Manual page 19

8x4 spacesaver sliding door - metal roof - ak

Advertisement

32.
Carefully flip completed Rafter Section over so Front Soffit is facing the front and place on
SpaceSaver walls. Note: Double check that your Rafter Section is positioned correctly by ensuring the
ends of the Rafters are sloped vertically as shown above.
33.
Position completed Rafter Section on top of walls. Outside Rafters will sit on Extension Wall
framing and be positioned equally from side to side.
Front Soffit.
34.
When Rafter Section is positioned correctly, both Front and Rear Soffits will sit approximately 1/8"
away from wall siding. This can vary slightly.
Toll Free 1-888-658-1658
Rafter sits on framing
www.outdoorlivingtoday.com
Rear Soffit.
Page 19
Rafter ends vertical.
Side View
sales@outdoorlivingtoday.com

Advertisement

loading