Table of Contents
Advertisement
ROBOCUT ROBO-CHIPPER
9.2 –
PERIODIC MAINTENANCE
Maintenance Schedule
Machine cleaning
Check tightness of nuts and bolts
Check casing
Check hammers
Check blades
Check roller arm play
Grease rotor bearings
Check wear and play of joints
Replace hydraulic oil ISO VG 46
DANGER
Used oil is highly corrosive and harmful to the environment. Wear suitable
clothing when carrying out the operation. Dispose of the oil properly after
use and follow the current regulations regarding disposal. Replace with
clean oil of the correct grade.
9.3 –
CLEANING, INSPECTION AND REPLACING PARTS
WARNING
Maintenance that involves removing the casing must be carried out
exclusively by authorized service centres.
WARNING
Before carrying out inspection, cleaning or maintenance at the end of each
job, turn off the machine, and wear protective gloves and footwear.
Maintenance that involves removing the casing must be carried out
exclusively by authorized service centres.
CAUTION
Check the hydraulic hoses for wear or oil leaks every day.
Hydraulic hoses must be replaced periodically; every 2000 hours or yearly.
Hoses that show signs of wear or damage should be replaced immediately.
Frequency of inspection / replacement
8 hours
50
100
hours
hours
X
X
X
X
X
X
44
600
6
hours
months
X
X
X
X
1 year
2
years
X
Advertisement
Table of Contents
Need help?
Do you have a question about the ROBO-CHIPPER ROBOCUT and is the answer not in the manual?
Questions and answers