Description Of The Safety Decals - McConnel ROBO-CHIPPER ROBOCUT Operations & Parts Manual

ROBOCUT ROBO-CHIPPER
2.3.2 –

Description of the safety decals

CAUTION
Make sure that the safety plates are in good condition. If the plates are
damaged, they must be replaced with original plates requested from the
manufacturer and placed in the position indicated in the manual. Make sure
that the safety decals are readable.
Clean them using a damp cloth dipped in soap and water.
Robo-Chipper – maximum material diameter 90mm (3½").
• Use personal protective equipment.
• Do not climb or stand on the machine.
• Read the instructions manual before using machine.
• Moving cutting tools.
• Rotating components.
Loading system controls & Emergency Stop.
Transport position.
Warning – Read the instruction manual first.
© 2015 Energreen srl
20