Introduction; Updates To The Manual - McConnel ROBO-CHIPPER ROBOCUT Operations & Parts Manual

ROBOCUT ROBO-CHIPPER
1.4 –

INTRODUCTION

The service standards outlined in this manual represent an integral part of the machine supply
contract.
These instructions are also addressed to operators already specifically trained to operate this kind
of machinery and contain all information necessary and essential for safe operation and correct/
optimal use of the machine.
Rushed and incomplete preparations lead to improvisation, the cause of many accidents.
Read the following suggestions carefully and put them into practice before starting work:
1) Familiarise yourself with all the operations that can be performed and work positions before
manoeuvring the machine.
2) The instructions manual must be available to the operator at all times.
3) Carefully schedule all work.
4) Have a detailed understanding of where and how the machine is going to be used: ground
bearing capacity, limitations to movement due to the presence of buildings, power lines etc.
5) Before starting work, make sure that the safety devices are working correctly and that there are
no doubts regarding their functionality. If they are not working correctly or you have doubts, do
not under any circumstances use the machine.
6) Pay careful attention to the warnings regarding specific hazards indicated in this manual.
7) Regular and thorough preventive maintenance will guarantee that the machine is always at its
highest possible level of operational safety. Never put off repairs that are necessary and ensure
they are carried out exclusively by qualified technicians and that only original spare parts are
used.
1.4.1 –

Updates to the manual

The information, the descriptions and the illustrations contained in this manual reflect the state of
the art at the moment the machine was sold.
The manufacturer reserves the right to make modifications to its products at any time for technical
or commercial reasons. In the event that such modifications are made, the manufacturer has no
obligation (for safety reasons) to modify the other machines sold up to that point or send out
updates to the manual. Moreover, this publication shall not be considered lacking in any way. Any
supplements that the Manufacturer considers appropriate to supply at a later date must be kept
together with the manual and considered an integral part of it.
3