Dismantling And Decommissioning - McConnel ROBO-CHIPPER ROBOCUT Operations & Parts Manual

ROBOCUT ROBO-CHIPPER
8.1 –

DISMANTLING AND DECOMMISSIONING

Should you decide to no longer use the machine or any part of it, it must be dismantled and
decommissioned. Before disposing of the equipment, any plastic, rubber and electrical components
must be separated and disposed of in the correct manner according to the regulations in force.
Drain any used fluids and dispose of them in a recycling facility that is suitably equipped to handle
these types of fluids.
Disposal of all components must be performed in accordance with all regulations in force.
WARNING
If the machines, or parts of it, are to be decommissioned, all parts that
could constitute a hazard must be made safe.
DANGER
The fluids contained in the machine, once drained from the circuits and
tanks, should be collected into appropriate containers, taking care that they
do not come in contact with the eyes, skin or mouth.
41