PaloAlto Networks PA-2000 Series Hardware Reference Manual
  1. Manuals
  2. Brands
  3. PaloAlto Networks Manuals
  4. Firewall
  5. PA-2000 Series
  6. Hardware reference manual
PaloAlto Networks PA-2000 Series Hardware Reference Manual

PaloAlto Networks PA-2000 Series Hardware Reference Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

PA-2000 Series
Hardware Reference Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PA-2000 Series and is the answer not in the manual?

Questions and answers

Related Manuals for PaloAlto Networks PA-2000 Series

Summary of Contents for PaloAlto Networks PA-2000 Series

  • Page 1 PA-2000 Series Hardware Reference Guide...

  • Page 2: About This Guide

    About this Guide This guide describes the PA-2000 Series firewall hardware, provides instructions on installing the hardware, describes how to perform maintenance procedures, and provides product specifications. This guide is intended for system administrators responsible for installing and maintaining the PA-2000 Series firewall.

  • Page 3: Table Of Contents

    July 17, 2015 - Palo Alto Networks COMPANY CONFIDENTIAL Table of Contents Chapter 1  Overview ..........Front Panel .
  • Page 4 4 • Table of Contents Palo Alto Networks...

  • Page 5: Chapter 1  Overview

    • “Front Panel” in the next section • “Back Panel” on page 7 Note: The PA-2050 and PA-2020 firewalls are collectively referred to as the PA-2000 Series. Palo Alto Networks Overview • 5...

  • Page 6: Front Panel

    Front Panel Front Panel Figure 1 shows the front panel of the PA-2050 and PA-2020 firewalls. Ethernet ports SFP ports LEDs PA-2050 Management Console port port port Ethernet SFP ports LEDs ports PA-2020 Management Console port port port Figure 1. Front Panel Table 1 describes the front panel features.

  • Page 7: Back Panel

    Back Panel Back Panel Figure 2 shows the back panel of the PA-2000 Series and Table 2 describes the back panel features. AC power Power Removable Inlet switch hard drive tray Figure 2. Back Panel Table 2. Back Panel Features...
  • Page 8 Back Panel 8 • Overview Palo Alto Networks...

  • Page 9: Installing The Hardware

    The warranty seals on the device itself do not show evidence of tampering. Before You Begin • It is recommended that two people be available to mount the PA-2000 Series in a 19-inch rack. • Have a Phillips head screwdriver available.

  • Page 10: Equipment Rack Installation

    Allow clear space on both sides of the firewall. Equipment Rack Installation Figure 3 shows how rack mounting brackets are attached to the PA-2000 Series. You can attach the brackets using the holes at the front of the unit. Figure 3. Attaching Rack Mounting Brackets The following safety guidelines apply to rack installation: •...

  • Page 11: Connecting Cables To The Device

    Figure 4. Cable Connections for the PA-2000 Series Connecting Power To power the PA-2000 Series, attach a power cable to the device (Figure 2) and plug it into a grounded wall outlet. Flip the switch to power the device. Palo Alto Networks...
  • Page 12 Connecting Power 12 • Installing the Hardware Palo Alto Networks...

  • Page 13: Maintaining The Hardware

    Note: The PA-2050 and PA-2020 firewalls are collectively referred to as the PA-2000 Series. Cautions and Warnings CAUTION: Disconnect all power cords before servicing the PA-2000 Series. WARNING: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the battery manufacturer’s instructions.

  • Page 14: Replacing A Hard Drive

    Replacing a Hard Drive Replacing a Hard Drive To remove the hard drive tray: Make sure the firewall has been powered down. Unscrew the hard disk drive tray thumbnail screws on the back of the firewall (Figure 5). Slide the tray out from the chassis. Detach the power and data cables from the hard disk drive.

  • Page 15: Interpreting The Device Leds

    The temperature is normal. Yellow The temperature is outside the normal tolerance. Interpreting the Port LEDs Each Ethernet port on the PA-2000 Series has two LEDs. Table 4 describes the LEDs. Table 4. Port LEDs Description Left Shows green if there is a network link.
  • Page 16 Interpreting the Port LEDs 16 • Maintaining the Hardware Palo Alto Networks...

  • Page 17: Chapter 4  Specifications

    July 17, 2015 - Palo Alto Networks COMPANY CONFIDENTIAL  Chapter 4 Specifications This chapter provides specifications for the PA-2000 Series. For more information, refer to the following topics: • “Physical Specifications” in the next section • “Interface Specifications” on page 18 •...

  • Page 18: Interface Specifications

    • Parity: none • Stop bits: 1 • Flow control: none USB port One USB port for future use. Electrical Specifications Table 7 lists the electrical specifications for the PA-2000 Series. Table 7. Electrical Specifications Specification Description Maximum internal power dissipation 250W...

  • Page 19: Compliance Statements

    July 17, 2015 - Palo Alto Networks COMPANY CONFIDENTIAL  Chapter 5 Compliance Statements This section lists the hardware compliance statements for the following: • “VCCI” in the next section • “BSMI EMC Statement” on page 19 VCCI This section provides the compliance statement for the Voluntary Control Council for Interference by Information Technology Equipment (VCCI), which governs radio frequency emissions in Japan.
  • Page 20 BSMI EMC Statement BSMI EMC 聲明 警告使用者 : 這是甲類的資訊產品 , 在居住的環境中使用時 , 可能會造成射頻干擾 , 在這種情況下 , 使用者會被要求採取某些適當的對策 製造商：偉創力國際 原產地：美國 / 部份零組件產地為美國及其它國家。 輸入頻率：50-60 赫茲（Hz） 輸入電壓（AC） ：100 〜 240 伏特 20 • Compliance Statements Palo Alto Networks...

Table of Contents