PaloAlto Networks PA-220 Hardware Reference Manual page 26

Install the PA-220 Firewall
head screwdriver. Use the appropriate screws (#10-32 x 3/4" or #12-24 x 3/4") for your rack
and torque to 25 in-lbs. Use cage nuts to secure the screws if the rack has square holes.
STEP 8 | (Four-post rack installaon only)
previously installed rack-mount rails and secure the brackets to the back-rack posts using the
appropriate screws for your rack (#10-32 x 3/4" or #12-24 x 1/2") and torque to 25 in-lbs.
Use cage nuts to secure the screws if the rack has square holes.
PA-220 Next-Gen Firewall Hardware Reference
Slide one back rack-mount bracket into each of the two
26
2021 Palo Alto Networks, Inc.
©