Data Acquisition (Polling) - TSI Instruments VelociCalc Plus 8384 Operation And Service Manual

Data Acquisition (Polling)

The V C Plus is designed to allow the user to perform polling
ELOCI ALC
through the use of a computer. To do this the user's computer must be
hooked up and in terminal mode and the baud rate for the computer and the
V C Plus must be set to the same value. For details on viewing or
ELOCI ALC
changing the baud rate see Changing the Baud Rate section in Chapter 2.
The user then must send an upper case V to the instrument. The values that
are sent back to the computer are for those measurement types that are
turned "on" in "Sample Options" menu. See Setting Data Storage Options
and SAMPLE INTERVAL Key sections earlier in this chapter for more details.
16 Chapter 3