Accessing The Web Interface - GeoVision GV-3D People Counter V2 Quick Start Manual

5. Accessing the Web Interface

Once the GV-3D People Counter V2 is connected to the network, you can view counting data
by using GV-Web Report Lite, a Web server built into the GV-3D People Counter V2. When
the device is connected to a network with a DHCP server, it will be automatically assigned
with a dynamic IP address. To look up this IP address, use GV-IP Device Utility desceribed in
Chapter 5 GV-IP Device Utility in GV-3D People Counter User's Manual.
However, if you do not have a DHCP server on your network, access the device by its default
IP address 192.168.0.10.
System Requirements
To access the device, Microsoft Internet Explorer 10 or above is requirred.
Logging In
1. In your Web browser, type the IP address or the domain name of the device in the
Location / Address field. This page appears.
Figure 3-1
1. Select the Language.
2. Type the default ID and password admin.
3. Type the characters shown in the image and click Login.
9