Ecb Programming - Danfoss VLT Option Panel Instruction Manual

ECB Programming

Use the drive keypad and display for programming
ECB functional options. All programming options
appear in numbered parameters. Parameters are
arranged in groups by related functions.
Programming is performed by accessing the
parameters through a menu and selecting from
displayed options or entering numerical values. See
the drives' supporting materials for detailed
programming instructions.
Access parameters to program bypass functions in
accordance with the following instructions.
1. Press MAIN MENU key on drive keypad to
access parameter groups. (Note that
memory function of menu returns to last
used function. Use BACK key to return to
main menu index when necessary.)
2. Press UP or DOWN arrows on drive
keypad to scroll through parameter
groups. Dotted outline surrounds selected
group. Bypass options are found in the 31-
00 Bypass parameter group.
40
3. Press OK key to enter selected parameter
group.
4. Use UP or DOWN arrows to scroll through
parameter list.
5. Press OK again to enter programming
mode which allows changing parameter
options or data. Option is inverse
highlighted.
6. Use UP or DOWN arrows to scroll through
programmable options.
7. Press OK key again to activate selection
or CANCEL key to cancel.
8. For entering numeric values, use RIGHT
or LEFT arrows to select numeric digit,
then use UP or DOWN arrows to scroll
through digit numbers 0-9. Selected digit is
inverse highlighted.
9. Press OK key to activate selection or
CANCEL key to cancel.
10. Press STATUS key to return to operational
display data or BACK key to return to
parameter menu options.