6-8 Setting up and Changing the Hardware Settings
You can set and change settings such as the luminance of the iTM unit's screen and buzzer
volume.
1. Touch the Hardware button on the System Settings tab of the Menu List screen and display the
Hardware Settings screen (see page 54).
2. In the Screen Luminance combo box (1), select and set the luminance level for the iTM screen
to a value between 1 and 8.
3. In the Buzzer combo box (2), select and set the volume for the buzzer that will sound at error or
emergency stop to a value between 0 and 5. Also select and set a sound duration from 1 min, 3
min, 5 min, and Continuous.
4. In the Touch Sound combo box (3), select and set the volume for the touch sound, the sound
when the screen is touched to a value between 0 and 5.
5. Touch the OK button to save and close the screen.
(1)
(2)
(3)
User's Manual EM11A017
DCM601A71 intelligent Touch Manager
130