Outputting Function Settings - Daikin Intelligent Touch Manager DCM601A71 User Manual

7-2 Outputting Function Settings

The iTM includes various functions, and each of them needs settings. You can output them to a
CSV file using the batch settings output function and load it to a computer to check the current
values in a list. The following describes how to output the settings.
See below for settings you can output using this function.
<Batch settings output details>
For information on how to interpret the output file, see the tables on the next pages.
Function
Schedule
Interlocking Control
Emergency Stop
Auto Changeover
Temperature Limit
Sliding Temperature
HMO
Setback
Power Proportional
Distribution
1. Touch the Setup Export button on the Operation Mgmt. tab of the Menu List screen (see page
56).
2. A confirmation dialog with the message "Save CSV-file with batch output settings?" appears.
Connect a USB memory to the iTM unit and touch the Yes button. Outputting to the USB
memory takes up to 2 minutes per 1MB.
3. Output is complete when the message "File has been saved." appears. Touch the Close button
to close the screen.
137
Settings of programs registered with the Schedule Control.
Settings of programs registered with the Interlocking Control.
Settings of programs registered with the Emergency Stop.
Settings of programs registered with the Auto Changeover.
Settings of groups registered with the Temperature Limit.
Settings of groups registered with Sliding Temperature.
Settings of management points registered with HMO.
Recovery temperature and setback temperature settings.
Excluded time settings of the past 13 months.
User's Manual EM11A017
DCM601A71 intelligent Touch Manager
Output content