Setting Up An Interlocking Program - Daikin Intelligent Touch Manager DCM601A71 User Manual

Setting up an interlocking program

The following describes how to program and set up an interlocking program based on the model
case below.
• Turn On the Ventilator when any of the indoor units for Office B goes On.
• Turn Off the Ventilator when all indoor units for Office B go Off.
Interlocking program name: Ventilator control program
Target: Office B (area consisting of indoor unit "a", indoor unit "b", and Ventilator "c")
Control program: (Output1) When either indoor unit "a" or indoor unit "b" goes on, turn on Ventilator "c".
(Output2) When both indoor unit "a" and indoor unit "b" go off, turn off Ventilator "c".
• Creating the Interlocking Program
Touch the Interlocking Control button on the Automatic Ctrl. tab of the Menu List screen and
display the main Interlocking Control screen (see page 52).
1. Setting up the interlocking program name
Touch the Create button
Enter "Ventilator control program".
Select the "Ventilator control program" registered in the list and touch the Edit button
display the Interlock Program Setup screen.
The required duration is "10 minutes".
(1)
and enter the program name in the Name Input dialog that appears.
User's Manual EM11A017
DCM601A71 intelligent Touch Manager
(1)
(2)
(2)
to
158