Turning On/Off The Internal Battery - Daikin Intelligent Touch Manager DCM601A71 User Manual

14-2

Turning ON/OFF the Internal Battery

The iTM is equipped with an internal battery to feed the clock during power failures and shutdown.
The internal battery is turned ON/OFF by using the BACKUP switch (1). The BACKUP switch is
located beneath the screwed cover that appears when the unit's sliding front cover is moved. (See
figure below.) Normally, it is set to ON.
When Turning OFF the Unit for a Long Time
When leaving the controller turned OFF for a long time (6 months or more), set the BACKUP switch
to OFF.
(Setting this switch to OFF does not erase area/management point settings, schedules, etc.)
• If power is not supplied to the iTM for a long time, the battery may discharge completely.
• When starting to use the iTM again, set the BACKUP switch to ON.
CAUTION
• Do not touch other switches.
• Do not turn the switch ON/OFF with excessive force. Doing so may damage the
components and cause malfunction.
• If electronic components in the iTM are charged with static electricity, it may cause
malfunction. Be sure to discharge the static electricity accumulated in your body before
attempting any operation.
To discharge yourself, touch a grounded metal object (control panel, etc.).
299
(1)
ON SLAVE
LAN SW
MASTER
BACKUP D MASTER
FRONT BACK
SERVICE LAN OFF MASTER
User's Manual EM11A017
DCM601A71 intelligent Touch Manager
BACKUP
MONI
MONITOR
CPU ALIVE LAN LINK D MONITOR
RESET
ON
OFF