Specialized Turbo Creo SL Comp E5 Service & Repair Workbook page 41

HOW TO UPDATE
TO UPDATE
•
POWER BIKE OFF
•
REMOVE TCU (TORX 10)
•
REMOVE RUBBER COVER, CONNECT MICRO USB CABLE
•
• CONNECT USB CABLE TO PC
• POWER ON TCU
• START TURBO STUDIO
• CHECK FOR UPDATES, RUN THEM
AFTER UPDATING
•
• REMOVE USB CABLES
RESEAL TCU USB PORT
•
REINSTALL TCU, TIGHTEN TO 0.8 NM
•
TEST FUNCTIONS, TEST RIDE
•
CREO SL: FIRMWARE UPDATES