SINGLE-POLE SPECIFICATION
CONTINUITY SPECIFICATION
PHASE ROTATION TEST SPECIFICATION
Voltage range
Frequency
Over voltage protection
Power supply
Dimensions
Weight
CLEANING & MAINTENANCE
•
Do not attempt to repair this unit. There are no user serviceable parts in the Tester.
•
Never attempt to open the casing apart from the battery cover.
•
Do not use the Tester if there is any physcial damage to the case or test probes.
•
The outer casing of the Tester can be cleaned with a soft damp cloth.
•
Do not use any chemicals, abrasives or solvents that could damage the Tester.
CHANGING THE BATTERIES
•
Turn the battery cover 90 degrees anti-clockwise.
•
Remove the cover and take out the spent batteries.
•
Replace the old batteries with 2 x 1.5V AAA (LR03) batteries, ensuring the correct
polarities are observed.
•
Put the battery cover back in place and turn 90 degrees clockwise.
CALIBRATION
•
The recommended calibration interval is 12 months.
Voltage range
Frequency range
Measuring range
100 - 690V AC
50 - 400Hz
0 - 400kΩ
100 - 690V
45 - 65Hz
690V AC/DC
2 x 1.5V AAA (LR03) batteries
255 x 70 x 28mm
200g
7