Playing Back A Tape - Sony Handycam DCR-PC7E Operating Instructions Manual

Playing back a tape

You can monitor the playback picture on the LCD screen or in the viewfinder.
(1) Insert the recorded tape with the window facing out.
(2) Open the LCD panel.
(3) While pressing the small green button on the POWER switch, set it to VTR.
The tape transport buttons light up.
(4) Press 0 to rewind the tape.
(5) Press · to start playback.
(6) Adjust the volume using VOLUME +/– and the brightness of the LCD screen
using LCD BRIGHT +/–.
You can also monitor the picture on a TV screen, after connecting the camcorder to a TV
or VCR.
1
LCD BRIGHT
3
POWER
VTR
OFF
CAMERA
PHOTO
To stop playback, press p.
To rewind the tape, press 0.
To fast-forward the tape rapidly, press ).
Using the Remote Commander
You can control playback using the supplied Remote Commander. Before using the
Remote Commander, insert the R6 (size AA) batteries .
To display the LCD screen/viewfinder screen indicators
Press DISPLAY.
To erase the indicators, press again.
Using headphones
Connect headphones (not supplied) to the AUDIO VIDEO OUT/2 jack (p. 64). You can
adjust the volume of the headphones using VOLUME +/–.
VOLUME
2
4
STOP REW PLAY FF
5
STOP REW PLAY FF
DCR-PC7E 3-858-632-12E (E32)
PAUSE
PAUSE
17