Displaying The Recording Data - Data Code Function - Sony Handycam DCR-PC7E Operating Instructions Manual

Displaying recording data – data code
function
You can display recording data (date/time or various settings when recorded) on the
LCD screen or in the viewfinder during playback (Data Code). The Data Code is also
displayed on the TV.
(1) Press MENU to display the menu on the LCD screen.
(2) Press v or V to select DATA CODE, then press EXECUTE.
(3) Press v or V to select DATE/CAM or DATE, then press EXECUTE.
(4) Press MENU to erase the menu display.
1
MENU
COMMANDER
REC MODE
MENU
BEEP
AUDIO MIX
DATA CODE
LCDCOLOUR
[MENU]:END
4
MENU
To display recording data during playback
Press DATA CODE on the Remote Commander.
Each time you press the button, the indicator changes as follows:
When DATE/CAM is selected in the menu system: date n various settings (AE LOCK,
white balance, gain, shutter speed, aperture value) n no indicator.
When DATE is selected in the menu system:
date n no indicator.
When bars (--:--:--) appear
• A blank portion of the tape is being played back.
• The tape was recorded by a camcorder without having date and time set.
• The tape is unreadable due to tape damage or noise.
VTR4
2
MENU MENU
COMMANDER
REC MODE
BEEP
AUDIO MIX
DATA CODE DATE/CAM DATA CODE
LCDCOLOUR
[MENU]:END [MENU]:END
3
MENU MENU
COMMANDER
REC MODE
BEEP
AUDIO MIX
DATA CODE DATE/CAM DATA CODE
DATE LCDCOLOUR
[MENU]:END [MENU]:END
DCR-PC7E 3-858-632-12E (E32)
EXECUTE
DATE/CAM
DATE
EXECUTE
DATE
39