Sony Handycam DCR-PC7E Operating Instructions Manual page 24

Changing the mode settings
Items for VTR mode only
AUDIO MIX*
Select this item and adjust the balance between the stereo 1 and stereo 2 by pressing
v or V.
DATA CODE <DATE/CAM or DATE>
• Select DATE/CAM to display date and recording data during playback.
• Select DATE to display date during playback.
* These settings are retained even when the battery is removed, as long as the
vanadium-lithium battery is charged. As far as the items without an asterisk are
concerned, their settings return to the default 5 minutes or more after the battery is
removed.
When recording a close subject
When REC LAMP is set to ON, the red camera recording lamp on the front of the
camcorder may reflect on the subject if it is close. In this case, we recommend you set
REC LAMP to OFF.
Note
When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance in
AUDIO MIX.
24
DCR-PC7E 3-858-632-12E (E32)