Playing Back A Tape - Sony Handycam CCD-TR700 Operation Manual

a
Playing Back a Tape
Various Playback Modes
To locate a scene (Picture search)
Keep pressing
or ►► during playback. To resume normal playback, release Ihe button.
To monitor the high-speed picture during fastforward or rewind (Skip scan)
Keep pressing « while rewinding or ►► while advancing the tape. To resume normal playback, press
O.
To view the picture at double speed
For double speed playback in the reverse direction, press </◄!!, then press x2 on the Remote
Commander during normal playback. For double speed playback in the forward direction, press >/
!!►, then press x2 during normal playback. To resume normal playback, press O.
To view a still picture (playback pause)
Press II during playback. To resume playback, press II or O.
To view the picture at 1/5 speed
(slow playback)
For reverse slow playback, press </◄!!, then press !► during normal playback. For forward slow
playback, press >/(!►, then press !► during normal playback. To resume normal playback, press t>.
To view the picture frame-by-frame
Press </-dll or >/!!► in still mode. If you keep pressing the button, you can view the picture at 1 /25
speed.
To resume normal playback, press E>\
To view the picture in a sequence of stop-motion images
Press EDITSEARCH in playback pause mode. If you keep pressing EDITSEARCH, you can view the
picture playback in the forward (+) or reverse (-) direction.
To change the playback direction
Press </◄!! for reverse direction or >/!!► for forward direction during playback. To resume normal
playback, press O.
Notes on playback
• When still picture mode lasts for 5 minutes or more, the camcorder automatically enters slop mode.
• The sound is muted in the various playback modes. It can be heard in the double speed forward
playback, but is a little noisy.
• Horizontal noise appears at the center of the screen when you play back a tape in reverse if the RC time
code or the Data Code is displayed on the screen. This is normal.
To display the viewfinder screen indicators on the TV
Press DISPLAY.
To erase the indicators, press DISPLAY again.
To Select the Monitor Sound
Normally set HiFi SOUND to STEREO in the menu system. When you playback a dual soundtrack tape,
set it to 1 or 2 in the menu system.