Searching For The End Of The Picture - Sony Handycam DCR-PC7E Operating Instructions Manual

Searching for the end of the picture

You can go to the end of the recorded portion after you record and play back the tape.
The tape starts rewinding or fast-forwarding and the last about 5 seconds of the
recorded portion plays back. Then the tape stops at the end of the recorded picture
(End Search).
Open the LCD panel and press END SEARCH during recording standby.
This function works when the POWER switch is set to CAMERA, VTR or PHOTO.
ENDSEARCH
Note on End Search
The End Search function does not work once you have ejected the cassette after you
recorded in the tape or if you do not record after you have inserted a tape.
19
DCR-PC7E 3-858-632-12E (E32)